Showing posts with label kiln shelves refractory castable anagama. Show all posts
Showing posts with label kiln shelves refractory castable anagama. Show all posts
Sunday, September 6, 2009
HESITATION ABOUT CASTING SHELVES
Okay, I'm procrastinating... I've been looking over the research article and found out that the alumina based castable they used was only 8 percent silica.... the rest was fused alumina or various sizes. My castables all have close to 30% silica. Hopefully, this won't be an issue at 2300-2400 degrees F, and may actually help with mullite formation at those temps. The norwegian folks were testing at higher temps mostly.
Saturday, September 5, 2009
today's work - kiln shelves out of castable
Man, I searched the web over and under for some refererence to building kiln shelves out of refractory castable and I finally (after months of searching) came up with this research article (norwegian microsilica company experiment). These guys make a synthetic micro silica that apparently helps create the best mullite matrixes ever. They are really pumped about what they do, and I got really pumped when I finally found validation for my assumptions.
Today I put together forms for these castable kiln shelves - tomorrow I cast them. All of them are 18 inches wide and 36 or 30 inches long, and last ut not least 1 3/4 inches thick. I rented a concrete vibrator to bring the material into the tightest possible relationship - a relationship that will hopefully foster a fecund grove of mullite crystals. I'll hopefully post photos after tomorrow.
Today I put together forms for these castable kiln shelves - tomorrow I cast them. All of them are 18 inches wide and 36 or 30 inches long, and last ut not least 1 3/4 inches thick. I rented a concrete vibrator to bring the material into the tightest possible relationship - a relationship that will hopefully foster a fecund grove of mullite crystals. I'll hopefully post photos after tomorrow.
Subscribe to:
Posts (Atom)
